Search results for "mips"

Package for CombiProbe MIPI60-Cv2 requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or Power Debug PRO requires an A-license

Combination of two converters to adapt from Intel MIPI60-Cv2 to MIPI20 pin-out on target

Converter MIPI60/20 Pin JTAG (ARM and TI) to 60 Pin CTOOLS connector on target

MIPI20T-HS Whisker for the use with CombiProbe and MicroTrace. Voltage range: 1.2V...5.0V. Maximum trace port width: 4 pins. Maximum trace bandwidth: 400 MBit/s per trace pin.

Converter to connect a Preprocessor with MIPI-60 connector to a Mictor-38 connector on the target assuming an ETMv3 pinout up to 16 bit.

Package for CombiProbe MIPI60-Cv2 requires PowerDebug Interface USB 3.0, PowerDebug II, PowerDebug PRO or PowerDebug E40 requires an A-license

Converter IDC20A or MIPI-20 to 10-pin ECU14

Whisker Cable for CombiProbe MIPI34 for Intel x86/x64

Converter to connect the ARM Debug Cable or the CombiProbe to a Mictor connector on the target. This is needed if you want to debug without a Preprocessor and if there is only a Mictor connector on the target. The trace signals of the CombiProbe are connected to the lowest four trace signals of the Mictor (ETMv3 pinout, continuous mode). But tracing is normally no use case due to the bandwidth limitations of the CombiProbe. Former name: ARM Conv. ARM-20/MIPI-34 to Mictor-38

Converter Mictor38 ARM20 MIPI34 UART to SD or Micro SD Socket