Search results for "la-3791"
supports Beyond Cores (0.4 V - 5 V) includes software for Windows, Linux and MacOSX requires Power Debug Module IDC20A debug cable
Preprocessor for ARC Real-Time Trace (ARC RTT) Connector cable and software, 600 MHz clock speed, 8,16,32 Bit Trace Port width, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Supports 1.2 to 3.3V - else contact support Requires PowerTrace Version 6 or higher or PowerTrace II / III
Adapter to measure JTAG signals by a logic analyzer or to disconnect single JTAG lines from the target
supports decoding of MCDS-based trace data, on-chip and off-chip please add the serial number of the existing serial preprocessor or the PowerTrace Serial to your order
Supports RH850 via JTAG, LPD4, LPD1 ICU-M core support included supports V850 via NWIRE Includes software for Windows, Linux and macOS. requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, Power Debug II PowerDebug PRO or PowerDebug E40 Debug cable with 14 pin connector
Converter from MIPI34 connector on CombiProbe for x86/x64 to 60 pin XDP (Samtec) connector JTAG for all platforms, 4-bit System Trace only for Medfield
Preprocessor for RH850 parallel Nexus trace interface Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Voltage range: 1.2 to 3.3V Trace port: 2..16 MDO (data), 1..2 MESO (control) Bandwidth: 600 MBaud (300MHz clock speed, DDR) Connector: 38 pin mictor connector requires PowerTrace II / III
Aurora NEXUS Preprocessor for Qorivva MPC57xx/SPC5 (high-speed serial trace port) - supports reference clock output up to 3125MHz POWER TRACE II / III: full support Supported speeds per lane: 4 lanes @ 4.25Gbps 3 lanes @ 6.0Gbps 2 lanes @ 6.25Gbps 1 lane @ 6.25Gbps POWER TRACE ETHERNET or POWER TRACE PX limited support Supported speeds per lane: 4 lanes @ 1.25 GBPS 2 lanes @ 2.5 GBPS - POWER TRACE ETHERNET module must have serial number E04xxxxxxxx or higher Required converter: - Samtec34 on target requires LA-3871: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec34 including Samtec 34-pin flex extension cable - Samtec22 on target requires LA-3872: Converter Samtec40 HSTP+AUTO26+JTAG14 to Samtec22 including Samtec 22-pin flex extension cable voltage range 0.15V to 1.25V
Supports decoding of MCDS-based trace data, on-chip and off-chip Requires LA-3829 Conv. Samtec40 to Samtec22 TriCore AGBT please add the serial number of the preprocessor to your order
Supports off-chip trace port for Nios II if applied to an AUTOFOCUS II preprocessor please add the serial number of the preprocessor to your order AUTOFOCUS II Preprocessors with serial number C0806xxxxxx and lower have to be send to Lauterbach Germany for an hardware upgrade