Search results for "cortex-a32"
PowerDebug X50 is the most advanced debug tool created so far. Is the gateway to unlimited debug capabilities meeting your challenges today and in the future.
"If cores share an electrically compatible debug interface e.g., several heterogeneous cores in a complex..." "The target device itself may have multiple cores, such as an SoC, or may have a JTAG chain with multiple..." "Cortex-M, the Compact Flow Trace (CFT) of TriCore SoCs, system traces like STP, STM, ITM, and others...." "Supported Architectures* Over 150 microprocessor architectures Over 150 microprocessor architectures Arm Cortex-M..." "or RISC-V 32 bit See more See more *: Depends on the debug probe used...."
With over 40 years of real-time embedded design experience, the engineering team at Lauterbach are there to help you get the most from the tools: timely support, processor expertise, rapid support for new processors, and lifetime product support.
"This means the training will have a general agenda and only general questions can be covered...." "They are available for groups of at least 3 participants and a maximum number of 15 attendees for online..." "Available for Groups See agenda Linux-aware Debugging Available for Groups only See Agenda Tracing for Arm/Cortex..."
Preprocessor for Real-Time Trace of C6x core Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace Version 6 or higher or PowerTrace II / III
Supports RISC-V 64-bit cores Multicore debugging included MIPI10 / MIPI20 connector on the target requires: LA-3770 Converter IDC20A to MIPI-10/20/34. ALTERA-10/RISCV-10 connector on the target requires: LA-3863 Converter IDC20A to ALTERA-10/RISCV-10. Includes software for Windows, Linux and macOS. Requires TRACE32 software R.2020.09 or newer. Requires Power Debug Module.
Parallel preprocessor for off-chip trace of CEVA-X cores. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: Two 38 pin mictor connectors Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).
Parallel preprocessor for real-time tracing of C6000 cores via a MIPI60 connector. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: 60 pin Samtec connector (MIPI) Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).
Parallel preprocessor for real-time tracing of C6000 cores via MICTOR38 connectors. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: Two 38 pin mictor connectors Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).
IDC20A debug cable with 20 pin connector to support AMD MicroBlaze™ cores. Includes TRACE32 software for Windows, Linux and macOS on DVD or via download. Requires PowerDebug module. You may want to add one the following converters: LA-3881 Converter IDC20A to XILINX-14 if a 14-pin Xilinx connector is used LA-3860 Converter IDC20A to PPC4xx-16 if a 16-pin PPC4xx connector is used For MicroBlaze™ V you require a RISC-V probe instead (LA-3200 or LA-3201).
Parallel preprocessor for Arm cores Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 60 pin Samtec connector (MIPI) Supports up to 4 trace sources (mix of TPIU and STM) Requires PowerTrace Version 6 or higher or PowerTrace II / III
Parallel preprocessor for ARM cores Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 60 pin Samtec connector (MIPI) supports up to 4 trace sources (mix of TPIU and STM) Requires PowerTrace Version 6 or higher or PowerTrace II / III