Search results for "a20"
Converter to connect the ARM Debug Cable or the CombiProbe to a Mictor connector on the target. This is needed if you want to debug without a Preprocessor and if there is only a Mictor connector on the target. The trace signals of the CombiProbe are connected to the lowest four trace signals of the Mictor (ETMv3 pinout, continuous mode). But tracing is normally no use case due to the bandwidth limitations of the CombiProbe. Former name: ARM Conv. ARM-20/MIPI-34 to Mictor-38
Converter to connect Preprocessor AutoFocus II Mictor38 to MIPI60 (QSH) connector ARM/Cortex: Converter to connect Mictor38 TRACE A and TRACE B (32-bit ETMv3/PTM) and an IDC20A Debug Cable to a MIPI60 connector on the target Intel x86/x64: Converter to connect Mictor38 TRACE A to to a MIPI60 connector on the target Former name: Conv. Prepro.AF II Mictor, ARM20 to MIPI60
Converter Mictor38 ARM20 MIPI34 UART to SD or Micro SD Socket
Converter for preprocessor for PPC4xx MICTOR 38 (LA-3900) to 20 pin male connector (target)
Combination of two converters to adapt from Intel MIPI60-Cv2 to MIPI20 pin-out on target
Converter from Mictor38 to Samtec20 for: LA-7610 (NEXUS Debugger and Trace for MPC5xxx)
CombiProbe 2 with MIPI20-HS whisker for debugging and tracing. Voltage Range: 1.2V...5.0V. Target Connector: MIPI20T, MIPI10 Trace Memory: 512 MByte. Maximum Trace Port Width: 4 pins. Maximum Trace Bandwidth: 400 MBit/s per trace pin. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7844A Debug Cortex-M (Armv6/7/8 32-bit) Add. LA-7843A Debug Cortex-A/-R (Armv7 32-bit) Add. LA-7765A JTAG Debugger License for Arm11 Add. LA-7742A JTAG Debugger License for Arm9 Add. LA-7746A JTAG Debugger License for Arm7 Add. LA-2540A Debugger for RISC-V 32-bit Add. LA-2541A Debugger for RISC-V 64-bit Add. Requires trace license LA-7970X for on-chip ETM traces of Cortex-A/R. Requires trace license LA-2767X for RISC-V off-chip traces emitted via a 4-bit Pin Interface Block (PIB). Requires Power Debug Interface USB 3.0,PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.
Converter 20 Pin JTAG swap (ARM and TI) to 60 Pin CTOOLS connector on target (electrical same as LA-3728)