Search results for "mips"
Converter to connect an ARM Preprocessor to a MIPI-60 on the target. Suitable for up to 16-bit ETMv3. The converter is prepared to support various other configurations because all clock and data signals of the MIPI-60 are connected to the Preprocessor.
Supported for Real-Time Trace of C64x+ if applied to an AUTOFOCUS MIPI preprocessors please add the serial number of the preprocessor to your order voltage range 1.2V to 3.3V
Package for CombiProbe MIPI60-Cv2 requires Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or Power Debug PRO requires an A-license
Supports C7000 trace if applied to an AUTOFOCUS MIPI preprocessors please add the serial number of the preprocessor to your order AUTOFOCUS II Preprocessors with serial number C0806xxxxxx and lower have to be send to Lauterbach Germany for an hardware upgrade
Converter to connect an IDC20A debug cable to the 34 pin DEBUG connector on a PowerTrace Serial. MIPI-34 connector does not have key pin. For connecting an IDC20A debug cable to an AutoFocus-II-MIPI preprocessor (LA-3160) or an AURORA 2 preprocessor (LA-3945) use the converter LA-3770 instead. (LA-2770 is for a MIPI34 connector with pin 1 on the right sight, while LA-3770 expects pin 1 on the left side at the target.)
Converter to connect an AutoFocus II Preprocessor with MICTOR-38 and an IDC20A Debug Cable to MIPI-10/-20T/-34. Enables the AutoFocus II Preprocessor to receive trace data from the 4-bit wide trace port of a MIPI-20T target connector. The converter is configured for MIPI-20T via 0 Ohm resistors. By soldering the resistors differently MIPI-34 can be supported as well. You can get the same converter pre-configured for MIPI-34 by ordering LA-3842 Converter Mictor-38/IDC20A to MIPI-34.
Whisker Cable MIPI60-Cv2 for CombiProbe. Requires one of the following extension cables: LA-1228 Flex Ext. for SAM 60 pin QTH-QSH series 05.00 LA-1238 Flex Ext. for SAM 60 pin QTH-QSH series 12.00 Voltage range 1.0V to 1.8V.
Converter to connect Preprocessor AutoFocus II Mictor38 to MIPI60 (QSH) connector ARM/Cortex: Converter to connect Mictor38 TRACE A and TRACE B (32-bit ETMv3/PTM) and an IDC20A Debug Cable to a MIPI60 connector on the target Intel x86/x64: Converter to connect Mictor38 TRACE A to to a MIPI60 connector on the target Former name: Conv. Prepro.AF II Mictor, ARM20 to MIPI60
CombiProbe 2 with MIPI20-HS whisker for debugging and tracing. Voltage Range: 1.2V...5.0V. Target Connector: MIPI20T, MIPI10 Trace Memory: 512 MByte. Maximum Trace Port Width: 4 pins. Maximum Trace Bandwidth: 400 MBit/s per trace pin. Includes the TRACE32 software for Windows, Linux and macOS on DVD and for download. Requires at least one of the following A-licenses: LA-3743A Debug. for Cortex-A/R (Armv8 and Armv9) Add. LA-7844A Debug Cortex-M (Armv6/7/8 32-bit) Add. LA-7843A Debug Cortex-A/-R (Armv7 32-bit) Add. LA-7765A JTAG Debugger License for Arm11 Add. LA-7742A JTAG Debugger License for Arm9 Add. LA-7746A JTAG Debugger License for Arm7 Add. LA-2540A Debugger for RISC-V 32-bit Add. LA-2541A Debugger for RISC-V 64-bit Add. Requires trace license LA-7970X for on-chip ETM traces of Cortex-A/R. Requires trace license LA-2767X for RISC-V off-chip traces emitted via a 4-bit Pin Interface Block (PIB). Requires Power Debug Interface USB 3.0,PowerDebug II, PowerDebug PRO, PowerDebug E40 or PowerDebug X50. Extend your CombiProbe with a Mixed-Signal Probe (LA-2500), to record and correlate digital and analog signals.
Package for CombiProbe MIPI60-Cv2 requires PowerDebug Interface USB 3.0, PowerDebug II, PowerDebug PRO or PowerDebug E40 requires an A-license