Search results for "cortex-a32"

Converter to connect Preprocessor AutoFocus II Mictor38 to MIPI60 (QSH) connector ARM/Cortex: Converter to connect Mictor38 TRACE A and TRACE B (32-bit ETMv3/PTM) and an IDC20A Debug Cable to a MIPI60 connector on the target Intel x86/x64: Converter to connect Mictor38 TRACE A to to a MIPI60 connector on the target Former name: Conv. Prepro.AF II Mictor, ARM20 to MIPI60

Digital/Analog probe with 40-pin connector for LA-3204 MicroTrace for Cortex-M (PACK) LA-3080 CombiProbe 2 for MIPI20T-HS (PACK) LA-3081 CombiProbe 2 for AUTO26 (PACK) LA-3082 CombiProbe 2 for MIPS32+4-Bit IFLOW (PACK) LA-3083 CombiProbe 2 for MIPI34 (PACK) LA-2520 / LA-2521 PowerTrace III LA-3121 / LA-3122 PowerTrace Serial 2 Characteristics of digital probe: 12 channels (12 data), 0..5 V Input, 200 MSamples per channel. Characteristics of analog probe: 6 Channels -12V..+12V 13 bit resolution, 2 current sense channels, Conversion rate 1 MSample/s. Requires TRACE32 software DVD 2021/02 or newer. Recommended accessories: LA-6470 Clip Set (Cable and Clips)

Preprocessor for Real-Time Trace of C6x core Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace Version 6 or higher or PowerTrace II / III

Supports RISC-V 64-bit cores Multicore debugging included MIPI10 / MIPI20 connector on the target requires: LA-3770 Converter IDC20A to MIPI-10/20/34. ALTERA-10/RISCV-10 connector on the target requires: LA-3863 Converter IDC20A to ALTERA-10/RISCV-10. Includes software for Windows, Linux and macOS. Requires TRACE32 software R.2020.09 or newer. Requires Power Debug Module.

Parallel preprocessor for off-chip trace of CEVA-X cores. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: Two 38 pin mictor connectors Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).

Parallel preprocessor for real-time tracing of C6000 cores via a MIPI60 connector. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: 60 pin Samtec connector (MIPI) Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).

Parallel preprocessor for real-time tracing of C6000 cores via MICTOR38 connectors. Includes connector cable and software. Voltage: 1.2 to 3.3V (contact support otherwise) Traceport: 1-32 bit Bandwidth: up to 600+ Mbit/s per trace signal Connector: Two 38 pin mictor connectors Variable threshold level and termination voltage, AUTOFOCUS self calibration technology Requires a PowerTrace module: PowerTrace PX / II / III (or PowerTrace Ethernet vers 6).

IDC20A debug cable with 20 pin connector to support AMD MicroBlaze™ cores. Includes TRACE32 software for Windows, Linux and macOS on DVD or via download. Requires PowerDebug module. You may want to add one the following converters: LA-3881 Converter IDC20A to XILINX-14 if a 14-pin Xilinx connector is used LA-3860 Converter IDC20A to PPC4xx-16 if a 16-pin PPC4xx connector is used For MicroBlaze™ V you require a RISC-V probe instead (LA-3200 or LA-3201).

Parallel preprocessor for Arm cores Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 60 pin Samtec connector (MIPI) Supports up to 4 trace sources (mix of TPIU and STM) Requires PowerTrace Version 6 or higher or PowerTrace II / III

Parallel preprocessor for ARM cores Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 60 pin Samtec connector (MIPI) supports up to 4 trace sources (mix of TPIU and STM) Requires PowerTrace Version 6 or higher or PowerTrace II / III