Search results for "bae"
From very low-power single-core chips up to high-performance multicore chips, your RH850 application can be improved using our Debug and Trace Tools.
"very low power single-core chips up to high performance multicore chips, your RH850 application can be..."
Agenda for training: Advanced debugging and tracing TriCore Aurix in Italy
Agenda for our training Script Language PRACTICE in Italy
Agenda for our training: Basic debugging single-core and multi-core systems in Italy
Agenda for training: Advanced debugging and tracing Arm Cortex in Italy
Adapter for debugging over a CAN bus with up to 8 Mbit/s supporting DAP over CAN Physical Layer (DXCPL), DAP over CAN Message (DXCM) and Single Signal Debug Port (SSDP). Includes a removable CAN termination resistor (120 Ohm). Requires an AUTO26 Debug Cable V3 (LA-3011), AUTO26 Debug Cable V2 (LA-3010), or a CombiProbe2 with AUTO26 Whisker (LA-3081). Requires PowerView software R.2024.02 or newer. For Arm® Cortex®-based SoCs, please order pack LA-3256 instead, which includes this CAN box together with a suitable debug cable.
Register to our Basic Debugging Training in Germany
Information on our Basic TRACE32 Training in the US can be found here
Preprocessor for Beyond BA2x cores Instruction trace only 600 MBaud (300MHz clock speed, DDR) Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Supports 1.8 to 3.3V - otherwise contact support Requires PowerTrace II, PowerTrace PX or PowerTrace/Ethernet Version 6 or higher May require LA-3804 Converter Mictor 38 to XILINX XGI voltage range 1.2V to 3.3V
Converter from Intel MIPI60-Cv2 to MIPI34 pin-out on target Converts termination scheme Intel (50 Ohm parallel termination at receiver) to termination scheme ARM (50 Ohm series termination at sender) Support for JTAG/SWD Maps Intel specific debug signals to MIPI34 pins. Default mapping: Intel PREQ -> DBGREQ (pin 18 on MIPI34) Intel PRDY -> DBGACK (pin 20 on MIPI34) Intel HOOK6 (PMODE) -> RTCK (pin 12 on MIPI34) Intel HOOK0 (PowerGood) -> BCE (pin 14 on MIPI34) Intel HOOK7 (ResetOut) -> RESET (pin 10 on MIPI34) TVREF (trace reference voltage) == DVREF (debug reference voltage) For other possible options, please contact Lauterbach.