Search results for "core"
Supports Armv8-A/R or Armv9-A/R based Cortex-A and Cortex-R 32/64-bit cores IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4 V - 5 V) Multicore debugging included includes software for Windows, Linux and MacOSX requires Power Debug Module cJTAG and SWD require Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or PowerDebug PRO
License for debugging Armv8 and Armv9 based Cortex-A, Cortex-R, Cortex-X and Neoverse 32/64-bit cores via Tessent Embedded Analytics (former UltraSoC) USB Debug for Windows and Linux requires TRACE32 software R.2020.09 The TRACE32 software must be specially adapted from Lauterbach for each chip. Please contact the Lauterbach development departement before ordering. floating license via RLM (Reprise License Manager) Please add the RLM HostID of the license server to your order (please see our FAQ)
Supports Arm Cortex-M cores and SecurCore SC000/SC300 trace support ETM Cortex-M via ETB included GTM and IPU debugging included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4V - 5V) Includes software for Windows, Linux and macOS cJTAG and SWD require PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace, PowerDebug II PowerDebug PRO, PowerDebug E40 or PowerDebug X50
IDC20A debug cable with 20 pin connector to support AMD MicroBlaze™ cores. Includes TRACE32 software for Windows, Linux and macOS on DVD or via download. Requires PowerDebug module. You may want to add one the following converters: LA-3881 Converter IDC20A to XILINX-14 if a 14-pin Xilinx connector is used LA-3860 Converter IDC20A to PPC4xx-16 if a 16-pin PPC4xx connector is used For MicroBlaze™ V you require a RISC-V probe instead (LA-3200 or LA-3201).
Supports Armv8 and Armv9 based Cortex-A, Cortex-R, Cortex-X and Neoverse 32/64-bit cores GTM, SPT, IPU and Multicore debugging included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4V - 5V) Includes software for Windows, Linux and macOS cJTAG and SWD require PowerDebug Interface USB 2.0/USB 3.0, PowerDebug Ethernet, PowerTrace, PowerDebug II PowerDebug PRO, PowerDebug E40 or PowerDebug X50
Benefit from having the same user experience, whether using it’s an emulation system or real target hardware that is under test; each scenario provides a system with consistent behavior.
"This can be done by either using a dedicated core running Linux in the target system that executes a..."
The TRACE32® PowerView software is our central front end for all your debug and trace activities, no matter which hardware modules or software-only solutions and irrespective of which targets you use.
"Debug your Embedded System without Limits Heterogeneous and Homogeneous Multicore Debugging PowerView..." "Even simultaneous debugging of multiple cores of different architectures is possible...." "Trace for getting Full Insights of Your Embedded System Heterogeneous and Homogeneous Multicore Tracing..." "PowerView can capture and analyze the program flow, task switches, data of several cores, and other..." "more sustainable world...."
Parallel preprocessor for Arm cores Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 60 pin Samtec connector (MIPI) Supports up to 4 trace sources (mix of TPIU and STM) Requires PowerTrace Version 6 or higher or PowerTrace II / III
Parallel preprocessor for ARM cores Embedded Trace Macrocell (ETM), Program Trace Macrocell (PTM) Connector cable and software, Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Support all ETM modes Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 60 pin Samtec connector (MIPI) supports up to 4 trace sources (mix of TPIU and STM) Requires PowerTrace Version 6 or higher or PowerTrace II / III
Trace Preprocessor with data for MPC505, MPC555, MPC56X, MPC821, MPC860 with soldered edge connection connector cable and software max bus frequency 66MHz Requires PowerTrace Version 6 or higher to support more than 40 MHz voltage range 2.5V to 5.0V