Search results for "coverter auto26"

Converter from MIPI10 to USB Type-C (UFP DAM, SWD on D1) for debugging. This device only provides pin conversion and does not support the USB protocol. E.g. for NVIDIA Orin

Converter to connect an IDC20A debug cable to the 34 pin DEBUG connector on a PowerTrace Serial. MIPI-34 connector does not have key pin. For connecting an IDC20A debug cable to an AutoFocus-II-MIPI preprocessor (LA-3160) or an AURORA 2 preprocessor (LA-3945) use the converter LA-3770 instead. (LA-2770 is for a MIPI34 connector with pin 1 on the right sight, while LA-3770 expects pin 1 on the left side at the target.)

Converter 20 pin IDC20A to 78K0R 16 pin NEC Former name: Converter ARM-20 to 78K-16

Converter from IDC20A connector to MCHP FlashPro socket Target connector pitch can be 2.54mm or 1.27mm (half size) Usable for PolarFire SoC Icicle Kit

Converter from IDC20A connector to Altera 10-pin (Byteblaster) or RISC-V 10-pin Target connector pitch can be 2.54mm or 1.27mm (half size)

Converter for Samtec ERF8-ERF8 Series CCS-female-female adaption 40 Positions e.g. Preproc. for ARM-ETM/HSSTP HF-Flex LA-7988, part from LA-1232

Converter to connect an AutoFocus II Preprocessor with MICTOR-38 and an IDC20A Debug Cable to MIPI-10/-20T/-34. Enables the AutoFocus II Preprocessor to receive trace data from the 4-bit wide trace port of a MIPI-20T target connector. The converter is configured for MIPI-20T via 0 Ohm resistors. By soldering the resistors differently MIPI-34 can be supported as well. You can get the same converter pre-configured for MIPI-34 by ordering LA-3842 Converter Mictor-38/IDC20A to MIPI-34.

Converter to connect a Debug Cable to a TI-14 or TI-20-Compact connector which is used on many targets with processors from Texas Instruments Former name: Converter ARM-20 to TI-14 or TI-20-Compact

JTAG Adapter Spartan3 Xilinx MicroBlaze 16 pin to 6 pin Boards: EVB Spartan3EStarter Kit; EVB S3ADSP1800A

Converter to connect a Debug Cable to 10/20/34 pin connectors specified by MIPI.