Search results for "a20"
supports Arm9 (0.4 V - 5 V) IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4 V - 5 V) includes software for Windows, Linux and MacOSX requires Power Debug Module cJTAG and SWD require Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or PowerDebug PRO
Supports Arm Cortex-M cores trace support ETM Cortex-M via ETB included IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4 V - 5 V) includes software for Windows, Linux and MacOSX requires Power Debug Module cJTAG and SWD require Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or PowerDebug PRO
All of our modular tools are driven from a single intuitive user interface, allowing existing users to feel right at home and assuring new users that the skills and knowledge they gain with CEVA-Teak can be easily transferred to other, future projects.
"philosophy has allowed us to create the widest tool support in the embedded industry, all driven from a..." "View all Flash Devices We support the programming of a large variety of flash devices...." "View all RELATED PRODUCTS TRACE32 Related Products for CEVA-Teak 18 products(s) found Name A-Z Name Z-A..." "Floating License TeakLite Front-End LA-8894L See details Add to cart JTAG Debug. for Teak/TeakLite JAM 20..." "Debugger for OAK/TeakLite SEIB (ICD) LA-7789 See details Add to cart JTAG Debugger for Teak/TeakLite JAM 20..."
Probe to record analog signals from a 20 pin IDC connector: 4 Channels 0..5 V 12 Bit Resolution, 3 Current Sense Channels, Conversion Rate 625K Samples/Sec. The probe requires one of the following modules. PowerIntegrator (LA-7940), PowerIntegrator II (LA-3940/3941/3942), PowerTrace II (LA-7692/7693/7694), PowerTrace Serial (LA-3120/3520/3555/3560). CombiProbe (LA-4502), CombiProbe 2 (LA-3060) and MicroTrace (LA-3050). For CombiProbe, CombiProbe 2 and MicroTrace the converter LA-4508 is required. For CombiProbe 2 and MicroTrace we recommend to use the Mixed-Signal Probe (LA-2500) instead of this analog probe. The probe is not suitable for PowerTrace III (LA-2520/2521), PowerTrace II Lite (LA-3580/3581), PowerTrace Serial 2 (LA-3121/3122). For those devices, you can use the Mixed-Signal Probe (LA-2500) instead (except for PowerTrace II Lite). Includes a 20 pin male-male adaptor.
AUTO26 Whisker for CombiProbe suitable for TriCore and dsPIC with 26-pin automotive connector, supporting DAP (DAP2, DAP3, DAP4, DAPWide), JTAG, DXCPL/DXCM. For optimal performance, we recommend using a DAP mode. DAP streaming is supported for TriCore (in DAP mode) and works most effectively with DAPWide (up to 320 Mbit/s). For DXCPL/DXCM, you will likely require the CAN-Box (LA-3889) as well. Voltage Range: 1.8V to 5.0V. Debug Clock Frequency: 10 kHz to 160 MHz Target Connector: AUTO26, AUTO20, AUTO10 Requires a CombiProbe or CombiProbe 2. For dsPIC only JTAG is supported and the converter LA-2773 to the 8-pin Microchip connector is recommended. Please note that TriCore SoCs usually support only 3.3V or 5V in DAP mode. Debug clock frequency in JTAG mode is typically limited to 40 MHz on TriCore SoCs (while up to 160 MHz is supported in DAP mode).
Supports Armv8-A/R or Armv9-A/R based Cortex-A and Cortex-R 32/64-bit cores IDC20A debug cable supports 5-pin standard JTAG, cJTAG and Serial Wire Debug Port, (0.4 V - 5 V) Multicore debugging included includes software for Windows, Linux and MacOSX requires Power Debug Module cJTAG and SWD require Power Debug Interface USB 2.0/USB 3.0, Power Debug Ethernet, PowerTrace, Power Debug II or PowerDebug PRO
MIPS - Lauterbach TRACE32 Debugger and Trace Solutions
"philosophy has allowed us to create the widest tool support in the embedded industry, all driven from a..." "View all Flash Devices We support the programming of a large variety of flash devices...." "View all RELATED PRODUCTS TRACE32 Related Products for MIPS 21 products(s) found Name A-Z Name Z-A 1..." "cart Converter MIPI-34 to JTAG MIPS14 + IFLOW LA-3781 See details Add to cart Converter MIPS-14 to ARM-20..." "cart JTAG Debugger for MIPS64 (ICD) LA-7761 See details Add to cart MIPS Converter MIPS-14 to MIPI-10/20..."
Converter from Intel MIPI60-Cv2 to MIPI34 pin-out on target Converts termination scheme Intel (50 Ohm parallel termination at receiver) to termination scheme ARM (50 Ohm series termination at sender) Support for JTAG/SWD Maps Intel specific debug signals to MIPI34 pins. Default mapping: Intel PREQ -> DBGREQ (pin 18 on MIPI34) Intel PRDY -> DBGACK (pin 20 on MIPI34) Intel HOOK6 (PMODE) -> RTCK (pin 12 on MIPI34) Intel HOOK0 (PowerGood) -> BCE (pin 14 on MIPI34) Intel HOOK7 (ResetOut) -> RESET (pin 10 on MIPI34) TVREF (trace reference voltage) == DVREF (debug reference voltage) For other possible options, please contact Lauterbach.
Digital/Analog probe with 40-pin connector for LA-3204 MicroTrace for Cortex-M (PACK) LA-3080 CombiProbe 2 for MIPI20T-HS (PACK) LA-3081 CombiProbe 2 for AUTO26 (PACK) LA-3082 CombiProbe 2 for MIPS32+4-Bit IFLOW (PACK) LA-3083 CombiProbe 2 for MIPI34 (PACK) LA-2520 / LA-2521 PowerTrace III LA-3121 / LA-3122 PowerTrace Serial 2 Characteristics of digital probe: 12 channels (12 data), 0..5 V Input, 200 MSamples per channel. Characteristics of analog probe: 6 Channels -12V..+12V 13 bit resolution, 2 current sense channels, Conversion rate 1 MSample/s. Requires TRACE32 software DVD 2021/02 or newer. Recommended accessories: LA-6470 Clip Set (Cable and Clips)
Parallel NEXUS Adapter with AutoFocus technology for Qorivva MPC5xxx/SPC5xxx and PX series includes debugger for eTPU and GTM Concurrent debugging of multiple e200 cores on multicore processors requires a License for Multicore Debugging (LA-7960X) (not necessary for lockstep mode) Voltage range: 1..5 V TRACE port: 2..16 MDO (data) lines 1..2 MSEO (control) lines Data Bandwidth: up to 200 MBit/s 76-pin mictor connector requires one of the following converters LA-7631 for Mictor 38 on target LA-7632 for Glenair 51 on target LA-7636 for SAMTEC 50 on target LA-7637 for SAMTEC 20 on target includes software for Windows, Linux and MacOSX requires PowerTrace hardware usage with PowerTrace III requires TRACE32 software DVD 2021/09 or newer please contact Lauterbach if the serial number of your PowerTrace is lower than E03010003982