Search results for "mips"
Preprocessor for Trace RISC-V tested for SiFive Nexus IP tested for UltraSoc Trace Encoder IP other IP on request Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace Version 6 or higher or PowerTrace II / III
tested for SiFive Nexus IP tested for Tessent Embedded Analytics (former UltraSoc) Trace Encoder IP other IP on request Variable threshold level and termination voltage, AUTOFOCUS self calibration technology, Voltage: 1.2 to 3.3V - else contact support Traceport: 1-32bit Bandwidth: 9.6 Gbps (300MHz clock speed, DDR) Connector: 2x38 pin mictor connector Requires PowerTrace Version 6 or higher or PowerTrace II / III
Converter SiFive PIB for PMOD to ribbon cable. PIB stands for "Probe Interface Block", which is an external parallel trace interface specified by SiFive for RISC-V trace. Use this converter togehter with LA-2730 (Converter MIPI-20T to IDC20A) and LA-3080 (CombiProbe 2 for MIPI20T-HS (PACK)) to receive RISC-V trace from a PMOD connector via a CombiProbe. This converter adapts from SiFive's 2x6 PMOD pin layout for PIB to the Lauterbach 10pin (2x5) ribbon cable. The other side of the 10pin ribbon cable is usally conntected to the Lauterbach converter LA-2730 (MIPI-20T to IDC20A).
Trace license to support the decoding of Intel Processor Trace applicable to an AutoFocus II or AutoFocus MIPI preprocessor. If the license is applied to an AutoFocus II preprocessor, the preprocessor must have a base serial number of C1210xxxxxxx or higher. Please add the base serial number of your existing preprocessor to your order.
Trace recorder for serial high-speed ports with 8 Gigabyte trace memory for RH850 Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Includes converter and flex-extension for Samtec34 target connector. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.
Trace recorder for serial high-speed ports with 4 Gigabyte trace memory for RH850 Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Includes converter and flex-extension for Samtec34 target connector. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.
Probe to record analog signals from a 20 pin IDC connector: 4 Channels 0..5 V 12 Bit Resolution, 3 Current Sense Channels, Conversion Rate 625K Samples/Sec. The probe requires one of the following modules. PowerIntegrator (LA-7940), PowerIntegrator II (LA-3940/3941/3942), PowerTrace II (LA-7692/7693/7694), PowerTrace Serial (LA-3120/3520/3555/3560). CombiProbe (LA-4502), CombiProbe 2 (LA-3060) and MicroTrace (LA-3050). For CombiProbe, CombiProbe 2 and MicroTrace the converter LA-4508 is required. For CombiProbe 2 and MicroTrace we recommend to use the Mixed-Signal Probe (LA-2500) instead of this analog probe. The probe is not suitable for PowerTrace III (LA-2520/2521), PowerTrace II Lite (LA-3580/3581), PowerTrace Serial 2 (LA-3121/3122). For those devices, you can use the Mixed-Signal Probe (LA-2500) instead (except for PowerTrace II Lite). Includes a 20 pin male-male adaptor.
Trace recorder for serial high-speed ports with 8 Gigabyte trace memory for Arm-ETM via HSSTP. Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Requires accessory kit LA-3521 or LA-3522. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.
Trace recorder for serial high-speed ports with 4 Gigabyte trace memory for Arm-ETM via HSSTP. Records up to 8 lanes with 12.5 Gbit/s per lane (more with opt. Prepro.) Voltage range: 0.15 to 1.25 differential voltage. Requires accessory kit LA-3521 or LA-3522. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS.
Trace recorder for serial high-speed ports with 4 Gigabyte trace memory and support for optional Analog Probe or Logic Analyzer Probe. This TRACE32 product is a license carrier. It requires a suitable, programmed TRACE32 A-license. Requires PowerDebug X50, PowerDebug PRO, or PowerDebug II. Requires PC with USB 3 or Gigabit Ethernet, 4 GB RAM min, and 64-bit OS. Voltage range: 0.15 to 1.25 differential Voltage. Optional Analog Probe: LA-7949 Optional Logic Analyzer Probe: LA-7945