Search results for "coverter auto26"
Converter to connect the CombiProbe to a connector specified by Texas Instruments (TI) which is used on a few targets with TI processors.
Converter from MIPI34 connector on CombiProbe for Intel x86/x64 to FPC 41pin (Panasonic) connector Adapter for the Intel Medfield Smartphone Reference Platform
Converter for MIPS-EJTAG 14 pins to 24 pins to support IDT processors IMPORTANT: This adpater can also be used for 20 pin target connections, but a separate wire for VCC is required. Please ask your local distributor.
Converter to connect the CombiProbe to an IDC20A connector specified by Arm or to a TI-14 connector specified by Texas Instruments Former name: ARM Converter MIPI-34 to ARM-20 or TI-14
Converter from a MIPI20T to a MIPI60 connector, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MIPI60 connector. Can be used for debugging with optional 4-bit trace if a MIPI60 connector is mounted on the target.
Converter to connect an AutoFocus II Preprocessor with MICTOR-38 and an IDC20A Debug Cable to MIPI-10/-20/-34. Enables the AutoFocus II Preprocessor to receive trace data from the 4-bit wide trace port of a MIPI-34 target connector. The converter is configured for MIPI-34 via 0 Ohm resistors. By soldering the resistors differently MIPI-20T can be supported as well. You can get the same converter pre-configured for MIPI-20T by ordering LA-3809 Converter Mictor-38/IDC20A to MIPI-20T.
Converter from Mictor 38 to 2.54 mm Connector
Converter to connect an ARM Preprocessor to a MIPI-60 on the target. Suitable for up to 16-bit ETMv3. The converter is prepared to support various other configurations because all clock and data signals of the MIPI-60 are connected to the Preprocessor.
Converter from a MIPI20T to a MICTOR38 connector with ETM pin-out, designed to connect a MIPI20T-HS Whisker (from a CombiProbe or MicroTrace) to a target with MICTOR38 connector. Can be used for debugging with optional 4-bit trace if a MICTOR38 connector with 4-bit ETM pin-out is mounted on the target.