Search results for "coverter auto26"
Converter for SH4 AUD Trace 36 pins of Yamaichi to SH4 AUD 36 pins on Hirose
Converter to MICTOR 38 connector on target from 16 pin male connector JTAG Debugger PPC4XX and MICTOR 38 of LA-7929 Preprocessor for PPC4xx family fast flex or LA-3900 Preproc. for PPC4XX AUTOFOCUS II Flex. Required if no separate JTAG connector is provided on the target.
Converter from IDC20A and HSSTP to R-Car H3 Starter Kit from Renesas Former name: Conv. ARM-20/Samtec40 HSSTP to RCAR-H3-SKIT
Converter from IDC20A to 12 pin PMOD connectors with the JTAG pinout from SiFive. The adapter exists in two variants: with male and female PMOD connector. This adapter has the male PMOD connector. PMOD is an open standard defined by Digilent for peripherals used with FPGAs or microcontrollers. The PMOD pinout of this adapter does ONLY work with targets that use the pinout that was defined by SiFive. So it is not a general/official RISC-V pinout. In case of FPGA boards, the pinout may depend on the used FPGA image.
Converter from IDC20A to 12 pin PMOD connectors with the JTAG pinout from SiFive. The adapter exists in two variants: with male and female PMOD connector. This adapter has the female PMOD connector. PMOD is an open standard defined by Digilent for peripherals used with FPGAs or microcontrollers. The PMOD pinout of this adapter does ONLY work with targets that use the pinout that was defined by SiFive. So it is not a general/official RISC-V pinout. In case of FPGA boards, the pinout may depend on the used FPGA image.
Passive slot card adapter or 1-lane PCIe. Converts standard Mini-PCIe slot card format to 80pin ERF8 for PowerTrace Serial. Conforms to PCI Express® Mini Card Electromechanical Specification. Requires the following items: * LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 500mm A * LA-3550X License for PCI Express * PowerTrace Serial with suitable trace deocder license * PowerDebug X50, PRO or II * Suitable Debug Cable with suitable debug license
Active slot card adapter for up to 4-lanes PCIe. Converts standard PCIe slot card format to 80pin ERF8 for PowerTrace Serial. Pinout conform to PCI-Express x4 Connector Pin-Out. Requires the following items: * LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 500mm A * LA-3550X License for PCI Express * PowerTrace Serial with suitable trace deocder license * PowerDebug X50, PRO or II * Suitable Debug Cable with suitable debug license
Active slot card adapter for up to 8-lanes PCIe. Converts standard PCIe slot card format to 80pin ERF8 for PowerTrace Serial. Pinout conform to PCI-Express x8 Connector Pin-Out. Requires the following items: * LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 500mm A * LA-3550X License for PCI Express * PowerTrace Serial with suitable trace deocder license * PowerDebug X50, PRO or II * Suitable Debug Cable with suitable debug license
Active slot card adapter for 1-lane PCIe. Converts standard PCIe slot card format to 80pin ERF8 for PowerTrace Serial. Pinout conform to PCI-Express x1 Connector Pin-Out. Requires the following items: * LA-1239 Flex Ext. for SAMTEC 80 pin ERM8-ERM8 500mm A * LA-3550X License for PCI Express * PowerTrace Serial with suitable trace deocder license * PowerDebug X50, PRO or II * Suitable Debug Cable with suitable debug license
Converter 14 pin and 36 pins of Yamaichi to JTAG and AUD pins of ERNI (inclusive adapter cables) For use with ETAS calibration tool