Go to homepage
Cart
Categories

Chip: TC4X

Vendor: Infineon Technologies AG
Family: AURIX™ TriCore™
Cores: TriCore v1.8.0, GTM, SCR, PPU
RECOMMENDED CONFIGURATIONS

Find the Ideal Tool Configuration for TC4X

Throughout our recommended debug and trace solutions, you can easily find and select the most suitable tool configuration for your chip. Whether you need to perform simple hardware debugging or more advanced tasks such as off-chip tracing, the following TRACE32 configurations will provide you with a good starting point.

Solution for TC4X
Essential Debugger with USB
Hardware Lauterbach PowerDebug E40 with AUTO26 debug probe
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3
Debug port 1 (AUTO26, AUTO20, AUTO10)
Debug clock 10 kHz to 160 MHz (depends on target)
Voltage range 1.8 V to 5.0 V
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace DAP streaming via optional license
More Details
Solution for TC4X
Universal Debugger ready for PowerTrace
Hardware Lauterbach PowerDebug X50 with AUTO26 debug probe
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3 and Gigabit Ethernet
Debug port 1 (AUTO26, AUTO20, AUTO10)
Debug clock 10 kHz to 160 MHz (depends on target)
Voltage range 1.8 V to 5.0 V
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
More Details
Solution for TC4X
Universal Debugger ready for PowerTrace
Hardware Lauterbach PowerDebug X50 with AUTO26 debug probe
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3 and Gigabit Ethernet
Debug port 1 (AUTO26, AUTO20, AUTO10)
Debug clock 10 kHz to 160 MHz (depends on target)
Voltage range 1.8 V to 5.0 V
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
More Details
Solution for TC4X
Universal Debugger ready for PowerTrace
Hardware Lauterbach PowerDebug X50 with AUTO26 debug probe
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3 and Gigabit Ethernet
Debug port 1 (AUTO26, AUTO20, AUTO10)
Debug clock 10 kHz to 160 MHz (depends on target)
Voltage range 1.8 V to 5.0 V
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
More Details
Solution for TC4X
Universal Debugger ready for PowerTrace
Hardware Lauterbach PowerDebug X50 with AUTO26 debug probe
Software Includes PowerView software, debug license and 1 year maintenance
PC connection USB 3 and Gigabit Ethernet
Debug port 1 (AUTO26, AUTO20, AUTO10)
Debug clock 10 kHz to 160 MHz (depends on target)
Voltage range 1.8 V to 5.0 V
Multicore debugging Yes, for same and other architectures via optional licenses
On-chip trace via optional license
Off-chip trace DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
More Details
Solution for TC4X
Serial Trace (AGBT) with cost-effective PowerTrace II Lite
Debug Hardware Lauterbach PowerDebug X50 with AUTO26 debug probe
Trace Hardware PowerTrace II Lite with serial trace probe and AGBT adapter
Software Includes PowerView software, debug license and 1 year maintenance
Multicore support Yes, for same and other architectures via optional licenses
PC connection USB 3 and Gigabit Ethernet
Debug Port 1 (AUTO26, AUTO20, AUTO10, 22-pin AGBT)
Serial trace lanes up to 4
Recording speed 6.25 Gbit/s per lane @ 2 lanes, 3.38 Gbit/s per lane @ 4 lanes
Streaming 100 MByte/s
Trace Memory 1 GByte
Signal probing not available
More Details
Solution for TC4X
Serial Trace (AGBT) with universal PowerTrace III
Debug Hardware Lauterbach PowerDebug X50 with AUTO26 debug probe
Trace Hardware PowerTrace III with serial trace probe and AGBT adapter
Software Includes PowerView software, debug license and 1 year maintenance
Multicore support Yes, for same and other architectures via optional licenses
PC connection USB 3 and Gigabit Ethernet
Debug Port 1 (AUTO26, AUTO20, AUTO10, 22-pin AGBT)
Serial trace lanes up to 4
Recording speed 6.25 Gbit/s per lane @ 3 lanes, 5.00 Gbit/s per lane @ 4 lanes
Streaming 400 MByte/s
Trace Memory 8 GByte
Signal probing via optional Mixed-Signal Probe
More Details
Solution for TC4X
Debugging via Calibration Tools (XCP)
Supported API Universal Measurement and Calibration Protocol (XCP)
Content Includes PowerView software, front-end license, XCP backend-license, and 1 year maintenance
Licenses Options Trace decoder license
More Details
Solution for TC4X
Debugging via 3rd party API
Supported High-Level APIs MCD, GDB, CADI, IRIS, GDI, ARCINT (depends on CPU architecture)
Supported Low-Level APIs XCP, GTL, CSWP, SPP, VPI, DCI.DbC, Tessent/USOC (depends on CPU architecture)
Content Includes PowerView software, front-end license and 1 year maintenance
Licenses Options Backend-license for low-level APIs, Trace decoder license
More Details
Solution for TC4X
Instruction Set Simulator
Simulator Simulates the instruction set of an architecture family (including its subfamilies)
Extendable Models of memory mapped peripheral can be connected
Automated testing The included license allows automated tests with the simulator.
Content Includes PowerView software, simulator license and 1 year maintenance
More Details

We´ll tailor your experience

We, Lauterbach GmbH, use cookies and similar technologies on our website. Some of them are technically necessary (e.g. session cookies or shopping cart cookies), while others are not necessary and help us to improve our online presence and to operate it economically.

More information